Check your Antivirus is Real or Fake

CHECK YOUR ANTIVIRUS IS REAL OR FAKE :

1) open notepad

2) Now copy and paste the below code into your notepad
X5O!P%@AP[4\PZX54(P^)7CC)7}$EICAR-STANDARD-ANTIVIRUS-TEST-FILE!$H+H*

3)After that press CTRL + S to save this file, here save this file as W2H.vbs
on your DESKTOP

If your antivirus is real then It will detect as virus and delete it and if your antivirus is fake then it will allow you to save this file.

Connect Laptop a projector

Applies to Windows 7

You can connect your computer to a projector to give a presentation on a large screen.

The instructions below describe how to connect to a projector by plugging the projector cable into a video port on your computer. This is the most common way to connect a projector.

You can also connect to some projectors (called network projectors) over a network. This allows you to give a presentation over a network if you aren't in the same room, or even the same building, as the projector. To see if your projector has this network capability, check the information that came with the projector or contact the manufacturer.

To connect to a projector

1.       Make sure the projector is turned on, and then plug the projector cable into a video port on your computer.

• Projectors use VGA or DVI cables. You must plug the cable into a matching video port on your computer. Although some computers have both types of video ports, most laptops just have one type. Some projectors can be connected to a USB port on your computer with a USB cable. 

2.       Open Control Panel by clicking the Start button , and then clicking Control Panel.

3.       In the search box, type projector, and then click Connect to a projector.

(To use a keyboard shortcut instead of Control Panel, press the Windows logo key +P).

4.       Select how you want your desktop to be displayed:

·         Computer only (This shows your desktop only on your computer screen.)

·         Duplicate (This shows your desktop on both your computer screen and a projector.)

·         Extend (This extends your desktop from your computer screen to a projector.)

·         Projector only (This shows your desktop only on a projector.)

The four choices for how to display your desktop

Note

•  You can use this same procedure to connect your computer to a monitor instead of a projector.

The Security Certificate Warning (Error) in IE, Mozilla Firefox & Google Chrome

The Security Certificate Warning looks like as shown below for IE, Mozilla Firefox and Google Chrome. Click to enlarge the images.

Microsoft IE- There is a problem with this web site Security Certificate

Mozilla Firefox – Secure Connection Failed

Google Chrome – The server’s Security Certificate is not yet valid

Fix:

The main reasons for such errors are:

Your Computer’s date is set to a wrong value.

The Security Certificate has really expired.

The web-site is not trustable.

Most common reason for such security certificate error is that the certificates are valid for a certain period of time, and if your computer’s date is set to other than the current date or correct date, there are high chances that you will get this warning. So the first thing to check when you receive such error is to check your computer’s date and time settings. If the date time keep re-setting again and again, then see this post on CMOS battery problem.

Now when you have set the date settings, you will most probably not see the this error again. But if you see the Security Certificate error, then either the certificate of the website has really expired as it had to be renewed from time to time, or the site is not trustable.

TIP: Never ever put your important login id or password on such pages if you see the Security certificate error.

Activate Windows 8 without using crack or patch

**Activate Windows 8 without using crack or patch***

1) Open your command prompt as administrator

2) Type exactly what you see below (Press enter after each line)

slmgr /upk

slmgr /ipk NG4HW-VH26C-733KW-K6F98-J8CK4

slmgr /skms lunar21.no-ip.org:80

slmgr.vbs -ato

3) Restart your system and enjoy your activated windows 8.

Note: This trick was tested on Windows 8 Professional Retail. Enjoy!!!

How to Access Blocked Websites

How to Access Blocked Websites?

Tens of thousands of websites are blocked and sometimes censored globally for various reasons. Further reading will help you learn how to unblock sites that you want to access.

Reliable VPN like the Hotspot Shield free vpn from AnchorFree can help unblock sites. It can hide IP address, making you anonymous online and provide uncensored access to all the content you want.

How to Use Hotspot Shield free VPN?

1. Download Hotspot Shield Free VPN

2. Install it on your system with one click.

3. You simply need to connect to Hotspot Shield VPN server located in the country that permits access to the website you want to access. Once done, Hotspot Shield will assign you an IP address belonging to its server in that country and hide your IP address (assigned to you by your ISP). You can now access your favorite content via Hotspot Shield free VPN in complete privacy.

4. When you access Netflix, Hulu, BBC iPlayer or other blocked websites via Hotspot Shield VPN, the websites does not know that you are a user from abroad. They recognize you by the IP address assigned to you by the local Hotspot Shield server and that is the reason why they will let you in.

5. Always remember, you can bypass internet filters, unblock sites and access your favorite content online using a free VPN like Hotspot Shield from anywhere in the world.

How to remove virus from your system using command prompt, and without anti virus

100% working trick
How to remove virus from your system using command prompt, and without anti virus?

Go to start -> type cmd -> once your command prompt window is opened.
select the drive form which you want to remover virus
for example w...e take "D" drive

D:\>
your "D" drive will be displayed like this on your command prompt window.... Now write the following command...

D:\>attrib -s -h *.* /s /d

the above command will unhide each and every single file on your "D" drive including the virus exe's and autorun.inf file.

once the above command is compiled again you'll see a message
D:\>
this is indicates that the above command executed successfully... Now type "dir" command

D:\>dir
and press enter, DIR is used to list all the files and directories on present on "D" drive....
After the successful execution of DIR command, all the files and folder will be listed on the prompt window...

Now check for suspicious files (i.e. exe's) and autorun.inf files,
once you find the above files.... just rename them and do change their extensions...
look example

D:\> rename autorun.inf abcde.pqr

this command will rename autorun.inf file to abcde with extension as "pqr"
same action can be performed over the exe files.

This code can be used with external storage media like pendrive.

NOTE: As autorun.inf files are used in order to run the virus exe as soon as the directory is opened by the user... So whenever you find any autorun.inf file, just rename them, because they are more dangerous than the virus itself,
exe file cannot execute itself, either you need to click on it or autorun.inf files are used to execute them.

Recover Formatted or Deleted Data

 

Recover Formatted or Deleted Data: (For More Guidance or Share your experience please Comment below)

The Possibility of Data Recovery after Formatting When you perform a formatting on a storage device such as memory card, ...hard disk, flash drive, or external hard disk drive etc; the data inside the storage device will be erased and get lost. However, it is still possible to restore the lost data with format recovery software. As a matter of fact, the deleted files after formatting are still intact inside the storage device. With the help of format recovery software, it is possible to recover lost photos, videos, music, documents, images etc after formatting. In this article, I would like to recommend two kinds of powerful format recovery software to you.
Free Download Data Recovery Software to Recover Files after formatting
First format recovery software (iCare Data Recovery Free) to recover data after formatting
It is free and it only has a small size, so you can easily download and install it to your computer. It only takes up a little resource of your computer.

Download iCare recovery free

Step1. Connect the storage device like to the computer. Once you have installed the format recovery software on your computer successfully, launch the software and choose the "Format Recovery" module for data recovery after formatting.

Step2. Choose the partition where you need to recover lost files and click "Recover" button, after which the program will begin to scan the selected partition in order to find the lost data.

Step3. After the scanning, you can see a partition list that contains all the partitions the software has found. Choose all the partitions and click the "Show Files" option to view all the files. Select all the files and click "Files Preview" button to preview those found files.
Step4. Mark all the files you want to recover and click "Save Files" button. Then choose a partition and create a new folder to save the selected files. Stop saving the selected files to the original partition in order to avoid original data being overwritten.


Second format recovery software(Stellar Data Recovery for Windows) for format recovery

Download Stellar for Format Recovery

The second format recovery software is also free and the steps are very easy as below:
Step1. Download and install the software to your computer. Launch the software and choose a recovery module for your case.

Step2. Choose the drive where you want to recover data and click "Start Scan" button. Then the software will scan the drive you selected and search for the lost files.

Step3. The whole scan process will be short; you only need to wait patiently while the scanning.

Step4. After scan, you can preview all the found files and save them to any other partition instead of the original one.

The Possibilities That You May Perform a Formatting
Although it is possible to recover lost data afterformatting, the chance of formatting recovery depends on how you format the partition. For example, if you format the partition by accident and you haven’t written any new data to the formatted partition before data recovery; the chance of data recovery is extremely good. However, if the partition has not formatted error and forces you to perform a formatting; you should be careful with this situation. You have two choices for this situation, either format it or not format it. And the result will also be completely different. If you format the partition, the not formatted error may disappear but the data inside will be erased and the chance of data recovery is not good. If you don’t format the partition, you will have no way to access the data inside but the data can be recovered with format recovery software.
What You Should Pay Attention to When You Lose Data after Formatting?

1. No more new data to the formatted partition
Any new added data to the formatted partition will overwrite the lost files and make the data recovery difficult or even impossible.

2. No physical damage to the formatted partition
Once the partition has suffered physical damage, the data recovery is impossible.

Convert Word to PDF

Convert Word to PDF (Microsoft Office Word documents to PDF) (For More Guidance or Share your experience please Comment below)

This tutorial shows how to convert a Microsoft Office Word document to a PDF. novaPDF is a PDF c...onverter that allows creating PDF files from any Windows application that supports printing. If you don’t have novaPDF installed, use the Download page to download and install it.

Microsoft Word is a word processing application part of the Microsoft Office suite. By installing novaPDF you can convert your word documents into PDF files – simply choose novaPDF as a printer and once you click the Print button your word files will be converted to PDF documents. Having your Microsoft Word documents in PDF format is an advantage if you want to send the documents to other users (the user receiving the document does not need Microsoft Word installed), send the documents to your portable devices or to print them.

Convert Microsoft Office Word 2007 files to PDF By having novaPDF installed as a virtual printer, you can create PDF documents simply by printing to it instead of your normal printer. To create PDF files from Microsoft Word 2007 documents (docx to PDF):

1. Open Microsoft Office Word 2007 and go to Office Button->Open (or press Ctrl+O), browse for the word document you want converted to PDF and open it

2. Go to Office Button-> Print (or press Ctrl+P) and in the Printer section choose novaPDF

3. Before creating the PDF file you can adjust novaPDF’s settings to customize the page from the Properties button (for example adding document information, embedding fonts, using auto-save options)

4. Click on OK and choose a location where you want the PDF file saved. After the PDF is created it will be automatically opened in the default PDF viewer (this can be configured too using novaPDF's Properties window).


Convert Microsoft Office Word 2010 files to PDF

Creating PDF documents from Word 2010 has never been easier when using novaPDF as the virtual printer.

All the users have to do is follow up on these next steps:

1. Download and install novaPDF on your computer if you haven't done this yet by accessing our Download page.

2. Open the .docx file in MS Word 2010, click File > Print and select novaPDF from the available printers dropdown list.

3.If you need to adjust novaPDF's specific settings, click on the "Printer Properties" button.

4. Click Print, fill in the path where you want to save your PDF and press OK.

Convert Microsoft Office Word to PDF files using the novaPDF Add-In During installation novaPDF gives the option to install an add-in for Microsoft Office applications. By default is checked and it will add in the supported Microsoft Office applications (for now is available in Word and Excel) another tab called novaPDF that will let users create PDF files directly from the Office interface by simply clicking a button.
To create PDF files from Microsoft Word using the novaPDF Add-in for Microsoft Office:

• Open the Microsoft Word document you want to convert
• Click on the novaPDF menu item
• Optionally you can change the settings of the novaPDF printer, or those of the novaPDF Add-in for Microsoft Office
• Click on Save As PDF and you'll be asked for a location where to save the resulting PDF file

The add-in has installs itself with default settings, but those can be modified if you need advanced customization of the resulting PDF.

How to COMPRESS 1GB Data into 10 MB

 

 How to COMPRESS 1GB Data into 10MB (For More Guidance or Share your experience please Comment below)
-----------------------------------------------------
It is a compression tool called KGB Archiver.
...
It is an open source compression tool like Alzip and winrar but the compression rate is much better then any other compression tool. It uses AES-256 encryption to encrypt archives . The disappointing thing with KGB Archiver is due to its high compression rate its minimum hardware requirements is high (Recommend processor
with 1.5 GHz and 1GB RAM) and compression and decompression process is time consuming.

Strength: -
Very high compression power
with very accurate result and no
loss of data.

Weakness: -
Due to high compression rate,
the time requires to compress
and decompress the file is high.

Use this trick to increase Mozilla Firefox speed

Use this trick to increase Mozilla Firefox speed (For More Guidance or Share your experience please Comment below)

1) Open Mozilla Firefox
2) In the address bar type: “about:config”...
3)Look for were it says “network.http.pipelining” to TRUE (Double Click it until it says TRUE)
4)Look for “network.http.proxy.pipelining” to TRUE (Also double click this until it says TRUE)
5) Now. Right-Click Anywhere then click “Create New” Then “Integer. Name it ''nglayout.initialpaint.delay''

Then Click Ok, then put the number “0" (Zero) in the next box

6) Click OK,
7) Restart Firefox. Feel The Difference in Speed

Lock a Folder With Password Using Free Folder Protector

 

Tips & Tricks:

Lock a Folder With Password Using Free Folder Protector: (For More Guidance or Share your experience please Comment below)

All of us have some files and folders that we consider private. They can be anything from our busine...ss documents to pictures of friends and family. These are files that we don't want other people using our computer to know about. As Windows offers no way to protect our private information, most of us get in awkward situations when these files are discovered by unwanted people.

Lock Folder WindowsSurely, you can store this information in a hidden folder. The only problem is that anyone can easily search the contents of a hidden folder using Windows Search itself.

The only viable solution is storing this content in a password protected folder so that only those people knowing the password of the folder can access it. There are many folder locking programs available online but the problem is that most of the good ones are paid. Even if you do manage to get a good free one, you will be looked at suspiciously when people see a folder locker in the list of your installed programs.

If you too find yourself in a similar situation, you can try Folder Protector, a password protector for Windows folders that is not only free but is also portable meaning that it does not need to be installed. Just click on the exe file and the program will start running. I have created this program based on suggestions and feature requests that I have received by email over the last two years.
Folder Protector

Folder Protector offers each user a protected folder that can only be opened by entering the password in FolderProtector. Unlike most security programs, Folder Protector is small in size (nearly 58KB) and does not show the folder that it is protecting. This gives an additional advantage that people who don't know the password do not have a target to try and hack their way into. As the software is portable, you can hide it or even delete it after protecting your folder and no one will have a clue that it was used. Then whenever you need to access protected files, you can re-download the program from this page, enter the password and access your protected files.
Download Folder Protector

Download for Windows 8, Windows 7 and Windows Vista

Download for Windows XP


How to use Folder Protector?
When you run Folder Protector for the first time, the program will ask you for a password that you want to use. Enter a password that you can remember as this will be the password to your protected folder.

Lock Folder With Password

After entering the password, the program will open a folder named SecuredFILES. This is your protected folder. You can add all your private files in this folder. This folder is located at the Desktop. After adding all your files, you may close this folder.

Then, you can use the menu in the program to lock your folder. To lock the folder, type lock as your action. After successfully locking the folder, FolderProtector will display that the folder is locked.

Free Folder Lock

Unlocking the protected folder is easy. Just type unlock as your action. Then the program will ask you to enter your password. Upon successfully entering the password, the program will display the contents of your protected folder.

Changing the Password: Just type change as your action. The program will ask you for your current password. Upon successful entry of the current password, the program will ask for your new password and change it instantly.

How to "Delete administrator Password" without any software

Tips & Tricks: (www.microtekh.com)

How to "Delete administrator Password" without any software (For More Guidance or Share your experience please Comment below)

Method 1
Boot up with DOS and delete the sam.exe and sam.log files from W...indows\system32\config in your hard drive. Now when you boot up in NT the password on your built-in administrator account which will be blank (i.e No password). This solution works only if your hard drive is FAT kind.


Method 2
Step 1. Put your hard disk of your computer in any other pc .
Step 2. Boot that computer and use your hard disk as a secondaryhard disk (D'nt boot as primary hard disk ).
Step 3. Then open that drive in which the victim¡¯s window(or your window) is installed.
Step 4. Go to location windows->system32->config
Step 5. And delete SAM.exe and SAM.log
Step 6. Now remove hard disk and put in your computer.
Step 7. And boot your computer

Create a unique Facebook profile picture

Tips & Tricks: (www.microtekh.com)

Create a unique Facebook profile picture: (For More Guidance or Share your experience please Comment below)

Facebook profile pictureAt the top of your Facebook profile, you'll see the five most recent pi...ctures containing a picture of you. You can use this section of your profile to make a more unique and original profile picture by extending the main profile picture into these recent pictures. As can be seen in the picture to the right, this profile takes a larger image and spreads it from the profile picture into the recent pictures across the top.

This can be accomplished using the free Pic Scatter online tool. With this tool, you can upload any picture and adjust the picture to be shown in the profile section, the top five images, and even the wall.

Notice When using this technique any time you or a friend tags you in a photo it will be posted in the top section of your profile ruining this effect. To keep this effect, hide any new photo by clicking the x that appears when hovering the mouse in the top right-corner of the picture.

How to convert FAT to NTFS file system

Tips & Tricks: (www.microtekh.com)

How to convert FAT to NTFS file system (For More Guidance or Share your experience please Comment below)

Many people don’t know the method to convert a FAT partition to NTFS, or if some of them know the ...trick they hesitate to perform because something can go wrong and their whole data can be lost. But in this article we will show you the easiest trick to convert FAT to NTFS. Just follow the easy instructions given below:

Note: Although the chance of corruption or data loss during the conversion from FAT to NTFS is minimal, but we suggest you to backup all your data.

Open Command Prompt in your windows.
At the command prompt, type

CONVERT [driveletter]: /FS:NTFS

Convert.exe will attempt to convert the partition to NTFS. Enjoy!!!

How to Multi-user login on Google Talk

Tips & Tricks: (www.microtekh.com)
 
How to Multi-user login on Google Talk: (For More Guidance or Share your experience please Comment below)

In “Method 1” we have edited the properties of the shortcut to Google Talk so that when ever we c...lick on the shortcut, a new window will open. But here we will create another shortcut which can be opened in a new window. So that two windows can be executed at the same time and you can deal with two user accounts as well. To create a new shortcut for Google Talk read and follow below steps:

1. Right-click on anywhere you want to place the GTalk shortcut.
2. From the content menu point to New and select Shortcut.
3. Copy and paste the following syntax in the location of item:

“c:program filesgooglegoogle talkgoogletalk.exe” /nomutex

4. Click on Next button.
5. Give the shortcut a proper name.
6. Click OK button and you are done.

7. Now the second shortcut you created will always open in a separate window.

MicroTekh Web Development Service

In order to accomplish our client’s highly focused business objectives and needs, MicroTekh team of professionals develop dynamic and secure websites that reach their target market, meet company goals and lend a strong support to sales strategies. We offer database driven websites allowing the administrator to manage the content of the various areas of the website from a control panel and have friendly Content Management System. On completion of the development process we also offer services that help our clients to reach the intended audience.

For development purposes we use HTML, PHP, CSS, DHTML, AJAX, JavaScript, XML, perl etc. For Server and Database Applications - Apache , MYSQL, MS SQL. We also provide custom template design services of modern Open Source CMS solutions like Joomla/Mamboo, WordPress, Drupal, etc.

MicroTekh Pro Packages

Micro Tekh provides complete website and art solutions for businesses.

Our packages includes; professional Custom Design, Long term and on-demand Maintenance and updates, domain name, emails, ecommerce and 24/7 support.

Additionally Micro Tekh provide an array of Quality services: Corporate Design services, web analytics,Testng, Search Engine Optimization (SEO), Social Media Optimization (SMO), rich content and mobile website design.

Backup Your Photos, Videos & Text from Facebook

Tips & Tricks: (www.microtekh.com)

Facebook offers all its users the ability to backup their photos, videos, and text. (For More Guidance or Share your experience please Comment below)

Click Account and go to Account Settings.

Click the Learn more option next to Download Your Information.

Click the Download button.

You will then be prompted with a message indicating that it will take some time to collect all your information. Once that information is ready for download you'll be sent an e-mail with a link to a compressed .zip file containing all your personal information.

How to Multi-user login on Google Talk

Tips & Tricks: (www.microtekh.com)

How to Multi-user login on Google Talk: (For More Guidance or Share your experience please Comment below)

In “Method 1” we have edited the properties of the shortcut to Google Talk so that when ever we click on the shortcut, a new window will open. But here we will create another shortcut which can be opened in a new window. So that two windows can be executed at the same time and you can deal with two user accounts as well. To create a new shortcut for Google Talk read and follow below steps:

1. Right-click on anywhere you want to place the GTalk shortcut.

2. From the content menu point to New and select Shortcut.

3. Copy and paste the following syntax in the location of item:

“c:program filesgooglegoogle talkgoogletalk.exe” /nomutex

4. Click on Next button.

5. Give the shortcut a proper name.

6. Click OK button and you are done.

7. Now the second shortcut you created will always open in a separate window.

How to turn your Windows 7 laptop into a wireless hotspot

Sharing your Windows internet connection via software has traditionally been a tricky business.

There are programs that can help you do it, but they're often awkward to set up, and prone to complicated security and reliability issues, so most people don't even try.

But that could all be about to change, thanks to a new Windows 7 feature called Virtual Wi-Fi.

The idea is a simple one: the operating system can virtualise any compatible wireless adapter, to make it appear as though you've as many additional adapters as you need.

The effect is dramatic. Once it's set up, then any Wi-Fi compatible device that can connect to you - another desktop, laptop, or an iPod Touch, say - will immediately be able to get online, by sharing your internet connection through a duplicate of your wireless adapter.

Getting this working isn't too difficult, either, as long as you can get over the first hurdle: finding a virtual Wi-Fi-compatible driver for your wireless adapter.

Intel's latest 32-bit and 64-bit drivers now include support, as do various others for Atheros, Broadcom, Realtek and other big players, but these don't apply to every chipset. Check the support site for your wireless adapter to see what's available.

If you're in luck and manage to find and install an up-to-date Windows 7 driver for your adapter, then the next step is to set it up, and for that you'll need an elevated command prompt. Click Start, type CMD, right-click the Cmd.exe link and select "Run as Administrator".

Now type the following command:

netsh wlan set hostednetwork mode=allow ssid=MyNet key=MyPassword

and press [Enter]. Replace "MyNet" with the name you'd like to use for your custom network, and "MyPassword" with a password that's a little harder to guess.

Still at the command line, type

netsh wlan start hostednetwork

and press [Enter] to fire up the virtual adapter.

Now click Control Panel > Network and Internet > Network and Sharing Centre > Change Adapter Settings, right-click your internet connection and select Properties. Click the Sharing tab, check "Allow other network users to connect...", choose your virtual Wi-Fi adaptor - and that's it.

Any nearby Wi-Fi enabled device should see a new network appear with the SSID you defined above. They'll be able to connect to it using your password, and can then immediately share your internet connection.

While it's worth knowing how to do this manually, if it's something you do often then you'll probably prefer a simpler solution.

You could speed things up a little by creating a batch file to run the netsh commands, perhaps, but for a really easy life we'd recommend you install Virtual Router. It's compact, free, and will automate the whole process for you with the minimum of hassle.